Outils pour utilisateurs

Outils du site


processing_vs_arduino_vs_minitel

Processing vs Arduino vs Minitel

Dispositif pour afficher des photos sur minitel

  • fig:Minitel-10.JPGfig:Minitel-2.JPG

légère adaptation du code perpétré par Renaud, Fabrice & Phil du tetalab pour le faire fonctionner sous Linux en utilisant la librairie GSVideo

Voir http://openatelier.labomedia.org/#25 pour d'autres images

Installation

Pour la faire fonctionner, il faut installer des logiciels complémentaires (LMDE 32 bit 12.2013) http://forum.processing.org/one/topic/how-is-video-on-linux-handled.html#25080000001764427

sudo apt-get install libgstreamer-plugins-base0.10-dev libgstreamer0.10-dev libglib2.0-dev

Note : Le programme Arduino ci-dessus ne fonctionne qu'avec Arduino < 1.0 (0023 par exemple). En effet, SoftwareSerial remplace NewSoftSerial dans les dernières versions, mais l'adaptation du code n'est pas directe.

Code Processing pour Linux

//Video2Minitel
//by Renaud, Fabrice & Phil
//Inspired from Video2ledwallHarpSerial V1.0 by Fabrice Fourc
// http://www.tetalab.org
 
 
// import processing.video.*;
import processing.net.*;
import codeanticode.gsvideo.*;
 
//GSCapture video;
boolean cheatScreen;
 
 
int plage=44;//256;
int MINITEL_CHAR_WIDTH = 40;//*2;
int MINITEL_CHAR_HEIGHT = 24;//*4;
// en fait ce n'est pas vraiment un pixel par pixel char...
int PIXEL_CHAR_WIDTH = 2;
int PIXEL_CHAR_HEIGHT = 3;
 
// Size of each cell in the grid, ratio of window size to video size
int videoScale = 10;
int videoScalex = 8;
int videoScaley = 6;
 
int count = 0;
 
// Number of columns and rows in our system
int cols, rows;
// Variable to hold onto Capture object
public int s = 50;
import processing.serial.*;
 
// The serial port:
Serial myPort;
 
//luminosite globale de la colone pour le son
int colValue;
String ledCol;
String ledWallMsg;
 
//Client myClient;
GSCapture video;
 
void setup() 
{
  size(MINITEL_CHAR_WIDTH*PIXEL_CHAR_WIDTH*videoScalex, MINITEL_CHAR_HEIGHT*PIXEL_CHAR_HEIGHT*videoScaley);
  frameRate(25);
 
  // List all the available serial ports:
  println(Serial.list());
 
  // I know that the first port in the serial list on my mac
  // is always my  Keyspan adaptor, so I open Serial.list()[0].
  // Open whatever port is the one you're using.
  myPort = new Serial(this, Serial.list()[0], 1200);
 
  //myClient = new Client(this, "127.0.0.1", 5204);
  // Initialize columns and rows
  cols = width/videoScalex;
  rows = height/videoScaley;
  video = new GSCapture(this, 160, 120);
// Pour utiliser la 2ème webcam
// video = new GSCapture(this,320,240,"v4l2src","/dev/video1",30/1); 
  video.start();
}
 
 
//----------------------------------------------------------
 
void displayPixelChar2(int x, int y)
{
  x= x *2;
  y = y * 3;
  byte carac=0; // caractère pixel
  carac+=(Math.pow(2, 0))*getG2(x+0, y+0);
  carac+=(Math.pow(2, 1))*getG2(x+1, y+0);
  carac+=(Math.pow(2, 2))*getG2(x+0, y+1);
  carac+=(Math.pow(2, 3))*getG2(x+1, y+1);
  carac+=(Math.pow(2, 4))*getG2(x+0, y+2);
  carac+=(Math.pow(2, 5))*1;
  carac+=(Math.pow(2, 6))*getG2(x+1, y+2);
  myPort.write(carac);
  println("carac= "+carac);
}
 
int getG2(int x, int y)
{
  println("x + y*video.width" + (x + y*video.width));
  color c = video.pixels[x + y*video.width];
  int value = (int)brightness(c);  // get the brightness
  if (value<s)
  {
    return(0);
  }
  else 
  {
    return(1);
  }
}
 
void draw() {
  // Read image from the camera
  noStroke();
 
  if (video.available()) 
  {
    video.read();
  }
  video.loadPixels();
 
  if (!mousePressed) //si je ne clique pas, j'affiche le preview
  {
    image(video, 0, 0);
    // Begin loop for columns
    for (int i = 0; i < cols; i++) 
    {
      // Begin loop for rows
      for (int j = 0; j < rows; j++) 
      {
        // Where are we, pixel-wise?
        int x = i*videoScalex;
        int y = j*videoScaley;
        // Looking up the appropriate color in the pixel array
        color c = video.pixels[i + j*video.width];
        int value = (int)brightness(c);  // get the brightness
        if (value<s)
        {
          fill(0);
        }
        else
        {
          fill(255);
        }
        rect(x, y, videoScalex, videoScaley);
      }
      ledWallMsg += ledCol;
    }
  }
  else //si je clique sur l'image j'envoi sur le port serie
  {
    myPort.write(12);
    myPort.write(14);
    for (int y=0;y<MINITEL_CHAR_HEIGHT;y++) 
    {
      for (int x=0;x<MINITEL_CHAR_WIDTH;x++) 
      {
        displayPixelChar2(x, y);
        println("x= "+x+"y= "+y);
      }
    }
  }
 
 
//  if (count%4 = 0) {
//    s+=1;
//  }
}
 
void keyPressed() //reglage du seuil (a-, z+)
{
  if ( key = 'a') 
  {
    s = s - 1;
    println("s " + s);
  }
  if ( key = 'z')
  {
    s = s + 1;
    println("s " + s);
  }
}
processing_vs_arduino_vs_minitel.txt · Dernière modification : 2020/10/29 14:03 de serge